I ordered some high density RGB stripes from Aliexpress and started again with some soldering work (after a huge bunch of how-to videos watched – a good tutorial can be found here). This is the first result of work:
The initial wiring of the manufacturer 
After some tries the soldering is quite ok 
The final strip including heat shrink
Items Used:
| Item | Link to shop |
|---|---|
| Aquacomputer RGBpx Cable (50 cm length) | https://shop.aquacomputer.de/product_info.php?products_id=3764 |
| BTF Lighting RGB LED strip (WS2812B White PCB / 1m 100 IP65) | https://www.aliexpress.com/item/2036819167.html?spm=a2g0o.cart.0.0.14c53c00d91cet&mp=1 |
The soldered strips will be used within the Desk PC 2.0 – It will be connected to the Aquacomputer Farbwerk 360 Controller.
Author
daniel.boller@email.ch
Related Posts
3D-Printing: Hook system for kitchenware
Had some aluminium profile left over from my Desk-PC project. So I once again went to the drawing board and quickly designed...
Read out all
Cosmetical updates for my HTPC
I recently updated my HTPC. The following parts were changed:
Read out all
Smarthome Update: Finally a purpose for my old tablet
I had this old tablet from Aldi lying around. Initially used it was used as an ebook reader. However, I always wanted...
Read out all
Desk-PC 2.0 Update: Front cover finally painted
I finally managed to spray paint the cover of the left drawer. Used some aluminum primer first, then three layers of white...
Read out all
Desk-PC 2.0 Update: External cable management completed
I finally found a nice looking cable tube which fits perfectly into my setup.
Read out all
The Makeover: HTPC in the spotlight
It has been a while since I last modified my HTPC in the living room. I finally had some time and a...
Read out all
1 comment